The InfoDAP from RSF combines the ergonomic class and robust build quality of the basic audioguide, with the reliability and permanent installation of the MicroDAP audio player, this system is a wired audioguide listening station that provides visitors with direct access to up to twelve different audio messages. The integrated motion sensor can be configured to automatically start playing a message when the handset is picked up. The InfoDAP could be fixed to a wall or under a table using a magnetised holder. It is attached to the exhibit by an armoured cable that surrounds the audio and control cables, therefore no battery and no maintenance are required for the handset. The InfoDAP’s twelve-button keypad allows volume control and language or message switching when required. The InfoDAP is extremely cost effective, reliable, and ideal for fixed listening spots where only a few messages are needed.
Different versions of the InfoDAP are available;
12 buttons for track selection and volume controls.
No buttons, for looped audio, and integrated induction loop for visitors with impaired hearing.
No buttons, for looped audio, and integrated induction loop for visitors with impaired hearing, volume buttons and internal amplifier.
All versions of the InfoDAP must be used with the MicroDAP Audio Player.
A battery-powered stand with speakers is also available for the InfoDAP handsets.
Wired Audioguide Listening Station Key Features;
CD quality digital audio allows flawless reproduction of your message through MP3 formatting.
Flash Card Storage. Solid state operation. The memory card is soldered directly to the circuit board for ultimate reliability.
Easy to use
Message starts automatically at pickup. Direct language selection.
Firmware modifications can be developed to allow for many more than the standard 12 messages.
Language can be changed mid-message while remaining synchronised.
Audio Format : CD 16 bit quality with MPEG1/2 Layer II/III (MP3) compression
Bandwidth : 20Hz to 20KHz
Distortion : less than 0,01%
Dynamic : 92 dB
Power amplification : 1 x 2 W (8 Ohm)
Recording duration : from 112 min. to 448 min. depending on the compression rate
Number of messages : 12 (can be increased with firmware modification)
Memory support : integrated 512MB flash card (soldered to circuit board)
Audio output : Loudspeaker integrated into handset
Control and bus : 12 push buttons integrated into handset
> Playing : 1 green LED on play back unit, 1 green LED on handset
> Handset : 258 x 58 x 25 mm(L x D x H)
> Handset : 165 Gr
> Relative humidity : 0-90%