BrightSign iBoot-IO Power Switch

£203.00 + VAT


In Stock


Print this page


From turning on a powerful spot lamp, to causing an alarm to sound, to starting a fan iBoot-IO gives you the flexibility to control any mains power source up to 2KW.

This version of iBoot-IO is developed to work with any BrightSign media player with a GPIO interface and responds to a zero or +3V logic level change.
iBoot-IO is easy to install – just attach it to the device you want to control, plug it into the power outlet and close the control contacts via the BrightSign player’s GPIO port, and you’ll gain remote power control. Use the adaptor for easy solder-free control cable connections to the BrightSign player.
Features include:
·         10 Amps Switching @ 240 VAC
·         12 Amps Switching @ 120 VAC
·         Contact Closure Input
·         Positive Feedback Output
·         Screw Terminal I/O connections
iBoot-IO uses industry standard IEC connections and ships complete with an input power cord and an IEC connector for the output power. Just plug iBoot-IO into the wall, and attach the device to be controlled. Then just close the control contacts and you are all set for remote power control from a BrightSign player or any other contact closure or low voltage logic output device.
105 – 240V AC
Power Switching
10 Amps at 210-240VAC
12 Amps at 105-125VAC,
Power Switching
Power Inlet: IEC 320 C13 Plug.
Power Out: IEC 320 C14 Receptacle.
External I/O
Removable screw terminal block.
18AWG maximum.
Maximum distance to control relay is 30ft/10m using 24AWG wire.
H x W x D: 2.0″ x 3.2″ x 4.2″ (60mm x 82mm x 107mm)
Weight 8.6 oz. / 244g
Operating Temperature 0 to 50 Deg. C
MTBF 420,000 Hours
Operating Cycles 10,000,000 Mechanical. 100,000 at Maximum Load
UL/cUL UL60950
Listed I.T.E File No. E225914
CE Directives 89/336/EEC, 92/31/EEC and 93/68/EEC
FCC Part 15 Class B

Product Enquiry