Digital Media Player Accessories
21 to 30 of 53 products
-
MicroAMP Miniature Amplifier
£96.00 + VAT Add to basketNo bigger than a pack of cards, this miniature stereo amplifier is easy to integrate and simple to hide. 2 x 10W output. 12V DC, 500mA power supply included. 8 year warranty (subject to T&C’s)!
-
RS232 Serial Adaptor Lead for BrightSign Series 3 and 4 Players
£11.00 + VAT Add to basketAn RS232 serial 9-pin D to 3.5mm jack adaptor lead (0.5m) for BrightSign Series 3 and 4 media players with an RS232 port. Enables the BrightSign media player to be connected to a PC or other computer or show controller with a regular DB9 male RS232 serial connector.
-
Capacitive Sensor
£78.00 + VAT Add to basketCan be used to provide triggering
through any non-ferrous material, allowing the creation of “magical”
touch points on printed displays, glass, and much more! 8 year warranty (subject to T&C’s)! -
Hydra Input/Output Expander
£48.00 + VAT Add to basketHydra Input/Output Expander
The Hydra™ from MedeaWiz is an Input and Output expander for the Sprite media player. It adds multiple trigger inputs and outputs, a motion sensor input and DMX512 control input. The Hydra connects to the Sprite’s serial port with the included 3.5mm 4-pole jack lead. This connection also supplies power to the Hydra.
-
BrightSign Wired DIY Motion Sensor Kit for newer Brightsign players
£42.00 + VAT Add to basketA wired plug and play solution for use with any BrightSign series 3 or 4 unit with a 15 way D’Type GPIO port. Offers instantaneous and seamless playback of desired videos or images after triggering. Suitable for triggering a single Brightsign Player.
-
25 Input Expander Board for the MedeaWiz Sprite DV-S1
£64.00 + VAT Add to basketAn input expander board for the Sprite DV-S1media player. Enables up to 25 separate inputs on a 5×5 matrix to the Sprite DV-S1 player. The input expander board is equipped with a screw terminal strip and programmed to take up to 25 inputs and control up to 25 triggered files on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger. The 8×78-25IN board is physically the same as the regular 8×78-IN board. Only the processor is programmed differently to accept 25 inputs.
-
NFC Reader for Commercial Tablets
£73.00 + VAT Add to basketThis NFC Reader Module is directly compatible with our 7 and 10″ Commercial Tablets. Attach the Module on your device and control all access by swinging the card in front of the NFC Reader and access will be granted/denied. Reads ISO/IEC 14443 Type A/B, R/W up to 848Kbits and ISO/IEC 18092 FeliCa R/W up to 424Kbits. Supports MiFare 1K/4K. Frequency: 13.56Mhz.
-
8 x Input 8 x Output USB Interface Board
£95.00 + VAT Add to basketThis 8-Inputs and 8-Outputs USB control board is designed for use with Series 3 and 4 BrightSign media players that have a USB interface port.
-
Series 3 & 4 to Series 2 GPIO Adapter for BrightSign Players
£25.00 + VAT Add to basketNo soldering required. Just screw the 12-way Pheonix terminal block supplied with the BrightSign Series 3 or 4 player to this adaptor for a quick and easy conversion to the established 15-pin D connector type on many older BrightSign GPIO accessories.
-
MicroMemoREC USB Interface
£330.00 + VAT Add to basketUSB interface essential for uploading content to the Micro Digital Audio Player and consequently the ProDAP Wired Audioguide/Listening Station system as well. Allows for a totally secure system. 3 year warranty.
21 to 30 of 53 products