Digital Media Player Accessories
11 to 20 of 48 products
19mm Vandal-Proof Steel Push-Button & 2 Metre Lead
Rugged, vandal-proof steel push-button for use in museums, kiosks, etc. Supplied with a 2m cable soldered on as standard but can be any length up to about 10m. Free ends are for connection to the screw terminals of the GPIO port or adapter.
12 Way Phoenix Screw Terminal Block for Series 3 and 4 Players
A 12-way Pheonix screw terminal block connector for BrightSign Series 3 and 4 media players with a GPIO port to facilitate the addition of button leads and remove the need for any soldering.
RS232 Serial Adaptor Lead for BrightSign Series 3 and 4 Players
An RS232 serial 9-pin D to 3.5mm jack adaptor lead (0.5m) for BrightSign Series 3 and 4 media players with an RS232 port. Enables the BrightSign media player to be connected to a PC or other computer or show controller with a regular DB9 male RS232 serial connector.
BrightSign iBoot-IO Power Switch
From turning on a powerful spot lamp, to causing an alarm to sound, to starting a fan iBoot-IO gives you the flexibility to control any mains power source up to 2KW.
8 Input Expander Board for the MedeaWiz Sprite DV-S1
An input expander board for the Sprite DV-S1media player. The input expander board is equipped with a screw terminal strip and programmed to take up to 8 inputs and control up to 8 triggered files on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger.
NFC Reader for 7 and 10″ Commercial Tablets
This NFC Reader Module is directly compatible with our 7 and 10″ Commercial Tablets. Attach the Module on your device and control all access by swinging the card in front of the NFC Reader and access will be granted/denied. Reads ISO/IEC 14443 Type A/B, R/W up to 848Kbits and ISO/IEC 18092 FeliCa R/W up to 424Kbits. Supports MiFare 1K/4K. Frequency: 13.56Mhz.
8X78 I/O Expander Board for the MedeaWiz Sprite DV-S1
The 8X78-IO input / output expander board is equipped with screw terminal strips and is programmed to take up to 8 inputs, control up to 8 triggered files to play and to generate output level changes on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger for the inputs and drive LEDs and relays with the 8 output lines.
BrightSign BP200 4 Button LED Board
4 x capacitive touch buttons with LEDs in the centre supplied on a thin board which can be easily overlaid with custom graphics etc. Supplied with 1 metre USB cable. Can be used with any BrightSign unit with a USB port.
IR Remote for the Brightsign Range
IR Remote Control compatible with any BrightSign players with a USB port and either the USB Transceiver or the 3.5mm jack IR Receiver Modules. Requires 2 x AAA batteries.
11 to 20 of 48 products