BrightSign LS, HD, XD & XT Series
1 to 10 of 21 products
-
12 Way Phoenix Screw Terminal Block for Series 3 and 4 Players
£7.00 + VAT Add to basketA 12-way Pheonix screw terminal block connector for BrightSign Series 3 and 4 media players with a GPIO port to facilitate the addition of button leads and remove the need for any soldering.
-
BrightSign WS103 WiFi Module for the BrightSign Series 3 and 4 Players
£58.00 + VAT Add to basketThe WS103 Wireless Module enables a BrightSign series 3 or 4 media player to network using Wi-Fi. The module is easily installed into a BrightSign media play for embedded wireless functionality. It supports 802.11a/b/g/n protocols and is only compatible with the BrightSign series 3 or 4 players. The WS103 cannot be fitted to any other model of the BrightSign media player.
-
USB-C to 3.5mm Jack Audio Adaptor Lead
£9.00 + VAT Add to basketSpecifically for the BrightSign LS423 media player, this USB 3.1 C-to-3.5mm jack adaptor lead allows analogue stereo audio at line level (0.7V p-p) to be taken to an external audio system. Length: 10cm.
-
GPIO Adaptor for Pre-Series 3 BrightSign Units
£18.00 + VAT Add to basketMake connecting to the GPIO port on the pre-series 3 BrightSign players a snip with this Adapter. No need to solder wires, just use the screw terminals!
-
16GB High Speed Micro SDHC Card
£5.00 + VAT Add to basketA 16GB microSDHC class 10 flash memory card. Recommended memory storage for installing in all BrightSign media players. The 16GB microSDHC card will store several hours of encoded HD or 4K media. Includes a microSD to SD adaptor for use in computers without a microSD reader / writer and with earlier BrightSign players with an SD card reader / writer. Suitable for all BrightSign series 3 and 4 players.
-
IR Receiver Module for BrightSign Players
£18.00 + VAT Add to basketAn IR Receiver module with 1m cable and 3.5mm jack plug for use with BrightSign digital media players fitted with a 3.5mm IR port. Connects to the IR port of a BrightSign media player and receives IR commands from a IR remote controller.
-
BrightSign Panelmount Motion Sensor Kit
£98.00 + VAT Add to basketNew! Plug and play solution for use with any BrightSign series 3 or 4 unit with a GPIO port. Offers instantaneous and seamless playback of desired videos or images after triggering. Suitable for triggering of single or multiple tracks.
-
BrightSign Motion Sensor Kit
£98.00 + VAT Add to basketPlug and play solution for use with any BrightSign series 3 or 4 unit with a GPIO port. Offers instantaneous and seamless playback of desired videos or images after triggering. Suitable for triggering of single or multiple tracks.
-
19mm Illuminated Vandal Proof Steel Push Button With 2 Metre Lead
£24.00 + VAT Add to basketA rugged, vandal-proof stainless-steel push-button with illumination for use in museums, kiosks, etc. Supplied with a 2m cable soldered on as standard but can be any length up to about 10m. The free ends are for connection to the screw terminals of the GPIO port or an adapter.
-
BrightSign iBoot-IO Power Switch
£203.00 + VAT Add to basketFrom turning on a powerful spot lamp, to causing an alarm to sound, to starting a fan iBoot-IO gives you the flexibility to control any mains power source up to 2KW.
1 to 10 of 21 products