Digital Media Player Accessories
1 to 53 of 53 products
-
12 Way Phoenix Screw Terminal Block for Series 3 and 4 Players
£7.00 + VAT Add to basketA 12-way Pheonix screw terminal block connector for BrightSign Series 3 and 4 media players with a GPIO port to facilitate the addition of button leads and remove the need for any soldering.
-
BrightSign WS103 WiFi Module for the BrightSign Series 3 and 4 Players
£58.00 + VAT Add to basketThe WS103 Wireless Module enables a BrightSign series 3 or 4 media player to network using Wi-Fi. The module is easily installed into a BrightSign media play for embedded wireless functionality. It supports 802.11a/b/g/n protocols and is only compatible with the BrightSign series 3 or 4 players. The WS103 cannot be fitted to any other model of the BrightSign media player.
-
IR Receiver Module for BrightSign Players
£18.00 + VAT Add to basketAn IR Receiver module with 1m cable and 3.5mm jack plug for use with BrightSign digital media players fitted with a 3.5mm IR port. Connects to the IR port of a BrightSign media player and receives IR commands from a IR remote controller.
-
USB-C to 3.5mm Jack Audio Adaptor Lead
£9.00 + VAT Add to basketSpecifically for the BrightSign LS423 media player, this USB 3.1 C-to-3.5mm jack adaptor lead allows analogue stereo audio at line level (0.7V p-p) to be taken to an external audio system. Length: 10cm.
-
GPIO Adaptor for Pre-Series 3 BrightSign Units
£18.00 + VAT Add to basketMake connecting to the GPIO port on the pre-series 3 BrightSign players a snip with this Adapter. No need to solder wires, just use the screw terminals!
-
16GB High Speed Micro SDHC Card
£5.00 + VAT Add to basketA 16GB microSDHC class 10 flash memory card. Recommended memory storage for installing in all BrightSign media players. The 16GB microSDHC card will store several hours of encoded HD or 4K media. Includes a microSD to SD adaptor for use in computers without a microSD reader / writer and with earlier BrightSign players with an SD card reader / writer. Suitable for all BrightSign series 3 and 4 players.
-
Motion Sensor for the MedeaWiz Sprite DV-S1
£40.00 + VAT Add to basketA PIR motion sensor assembly for the Sprite DV-S1 media player. Plugs directly into and is powered from the Sprite’s I/O port. Includes 2m lead.
-
IR Remote for the Brightsign Range
£30.00 + VAT Add to basketIR Remote Control compatible with any BrightSign players with a USB port and either the USB Transceiver or the 3.5mm jack IR Receiver Modules. Requires 2 x AAA batteries.
-
BrightSign DIY Motion Sensor Kit
£33.00 + VAT Add to basketNew! Plug and play solution for use with any BrightSign series 3 or 4 unit with a GPIO port. Offers instantaneous and seamless playback of desired videos or images after triggering. Suitable for triggering of single or multiple Brightsign players.
-
BrightSign Wired DIY Motion Sensor Kit
£42.00 + VAT Add to basketA wired plug and play solution for use with any BrightSign series 3 or 4 unit with a 15 way D’Type GPIO port. Offers instantaneous and seamless playback of desired videos or images after triggering. Suitable for triggering a single Brightsign Player.
-
GPIO to USB-C Adapter Cable
£30.00 + VAT Add to basketA USB-C to GPIO adapter cable assembly with two 6-pin GPIO screw terminal blocks. Adds an 8-channel GPIO port to the BrightSign LS423 media player via its USB-C port. Also extends the GPIO capabilities of the BrightSign XD1033, XD1034, XT1143 and XT1144 media players.
-
19mm Illuminated Vandal Proof Steel Push Button With 2 Metre Lead
£12.00 + VAT Add to basketA rugged, vandal-proof stainless-steel push-button with illumination for use in museums, kiosks, etc. Supplied with a 2m cable soldered on as standard but can be any length up to about 10m. The free ends are for connection to the screw terminals of the GPIO port or an adapter.
-
8 Input Expander Board for the MedeaWiz Sprite DV-S1
£39.00 + VAT Add to basketAn input expander board for the Sprite DV-S1media player. The input expander board is equipped with a screw terminal strip and programmed to take up to 8 inputs and control up to 8 triggered files on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger.
-
19mm Vandal-Proof Steel Push-Button with 2 Metre Lead
£10.00 + VAT Add to basketRugged, vandal-proof steel push-button for use in museums, kiosks, etc. Supplied with a 2m cable soldered on as standard but can be any length up to about 10m. Free ends are for connection to the screw terminals of the GPIO port or adapter.
-
BrightSign iBoot-IO Power Switch
£203.00 + VAT Add to basketFrom turning on a powerful spot lamp, to causing an alarm to sound, to starting a fan iBoot-IO gives you the flexibility to control any mains power source up to 2KW.
-
10 Inch POE Tablet Commercial
£265.00 + VAT Add to basketThe Technovia 10 inch PoE Tablet is extremely versatile and designed to be used in a wide variety of situations. This commercial grade tablet has some enviable stats, which include an internal memory of 8GB and 2GB of RAM. The touch screen has a 10 point capacitive touch and a screen resolution of: 1280*800.
The product dimensions are 255mm width, 172mm height, 29mm depth 0.7kg weight.
-
MicroSpeaker 1 Round
£68.00 + VAT Add to basketMicroSpeaker range comprises of two differing miniature loudspeaker
models that are both easy to integrate into a dividing wall or
various cabinets, shelving and offer exceptional
sound quality. 6cm diameter. 3 yr warranty. -
Hydra Input/Output Expander
£48.00 + VAT Add to basketHydra Input/Output Expander
The Hydra™ from MedeaWiz is an Input and Output expander for the Sprite media player. It adds multiple trigger inputs and outputs, a motion sensor input and DMX512 control input. The Hydra connects to the Sprite’s serial port with the included 3.5mm 4-pole jack lead. This connection also supplies power to the Hydra.
-
8X78 I/O Expander Board for the MedeaWiz Sprite DV-S1
£55.00 + VAT Add to basketThe 8X78-IO input / output expander board is equipped with screw terminal strips and is programmed to take up to 8 inputs, control up to 8 triggered files to play and to generate output level changes on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger for the inputs and drive LEDs and relays with the 8 output lines.
-
16mm Vandal Proof Steel Push Button With 2 Metre Lead
£12.00 + VAT Add to basketA rugged, IP-65 rated, 16mm stainless-steel push-button switch with normally-open contacts and 2m. of cable for use with BrightSign media players with a GPIO port.
-
MicroAMP Miniature Amplifier
£96.00 + VAT Add to basketNo bigger than a pack of cards, this miniature stereo amplifier is easy to integrate and simple to hide. 2 x 10W output. 12V DC, 500mA power supply included. 8 year warranty (subject to T&C’s)!
-
RS232 Serial Adaptor Lead for BrightSign Series 3 and 4 Players
£11.00 + VAT Add to basketAn RS232 serial 9-pin D to 3.5mm jack adaptor lead (0.5m) for BrightSign Series 3 and 4 media players with an RS232 port. Enables the BrightSign media player to be connected to a PC or other computer or show controller with a regular DB9 male RS232 serial connector.
-
Capacitive Sensor
£78.00 + VAT Add to basketCan be used to provide triggering
through any non-ferrous material, allowing the creation of “magical”
touch points on printed displays, glass, and much more! 8 year warranty (subject to T&C’s)! -
Hydra Input/Output Expander
£48.00 + VAT Add to basketHydra Input/Output Expander
The Hydra™ from MedeaWiz is an Input and Output expander for the Sprite media player. It adds multiple trigger inputs and outputs, a motion sensor input and DMX512 control input. The Hydra connects to the Sprite’s serial port with the included 3.5mm 4-pole jack lead. This connection also supplies power to the Hydra.
-
BrightSign Wired DIY Motion Sensor Kit for newer Brightsign players
£42.00 + VAT Add to basketA wired plug and play solution for use with any BrightSign series 3 or 4 unit with a 15 way D’Type GPIO port. Offers instantaneous and seamless playback of desired videos or images after triggering. Suitable for triggering a single Brightsign Player.
-
25 Input Expander Board for the MedeaWiz Sprite DV-S1
£64.00 + VAT Add to basketAn input expander board for the Sprite DV-S1media player. Enables up to 25 separate inputs on a 5×5 matrix to the Sprite DV-S1 player. The input expander board is equipped with a screw terminal strip and programmed to take up to 25 inputs and control up to 25 triggered files on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger. The 8×78-25IN board is physically the same as the regular 8×78-IN board. Only the processor is programmed differently to accept 25 inputs.
-
NFC Reader for Commercial Tablets
£73.00 + VAT Add to basketThis NFC Reader Module is directly compatible with our 7 and 10″ Commercial Tablets. Attach the Module on your device and control all access by swinging the card in front of the NFC Reader and access will be granted/denied. Reads ISO/IEC 14443 Type A/B, R/W up to 848Kbits and ISO/IEC 18092 FeliCa R/W up to 424Kbits. Supports MiFare 1K/4K. Frequency: 13.56Mhz.
-
8 x Input 8 x Output USB Interface Board
£95.00 + VAT Add to basketThis 8-Inputs and 8-Outputs USB control board is designed for use with Series 3 and 4 BrightSign media players that have a USB interface port.
-
Series 3 & 4 to Series 2 GPIO Adapter for BrightSign Players
£25.00 + VAT Add to basketNo soldering required. Just screw the 12-way Pheonix terminal block supplied with the BrightSign Series 3 or 4 player to this adaptor for a quick and easy conversion to the established 15-pin D connector type on many older BrightSign GPIO accessories.
-
MicroMemoREC USB Interface
£330.00 + VAT Add to basketUSB interface essential for uploading content to the Micro Digital Audio Player and consequently the ProDAP Wired Audioguide/Listening Station system as well. Allows for a totally secure system. 3 year warranty.
-
MiniAMP Miniature Amplifier
£250.00 + VAT Add to basketHigh quality class T digital amplifier. Extremely small size makes integration simple, and control inputs allow remote management. 2 x 30W provides power for even most demanding of installations. 8 year warranty (subject to T&C’s)!
-
BrightSign BP200 4 Button LED Board
£50.92 + VAT Add to basket4 x capacitive touch buttons with LEDs in the centre supplied on a thin board which can be easily overlaid with custom graphics etc. Supplied with 1 metre USB cable. Can be used with any BrightSign unit with a USB port.
-
25 Input Expander Board for the MedeaWiz Sprite DV-S1
£64.00 + VAT Add to basketAn input expander board for the Sprite DV-S1media player. Enables up to 25 separate inputs on a 5×5 matrix to the Sprite DV-S1 player. The input expander board is equipped with a screw terminal strip and programmed to take up to 25 inputs and control up to 25 triggered files on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger. The 8×78-25IN board is physically the same as the regular 8×78-IN board. Only the processor is programmed differently to accept 25 inputs.
-
8 Input Expander Board for the MedeaWiz Sprite DV-S1
£39.00 + VAT Add to basketAn input expander board for the Sprite DV-S1media player. The input expander board is equipped with a screw terminal strip and programmed to take up to 8 inputs and control up to 8 triggered files on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger.
-
Motion Sensor for the MedeaWiz Sprite DV-S1
£40.00 + VAT Add to basketA PIR motion sensor assembly for the Sprite DV-S1 media player. Plugs directly into and is powered from the Sprite’s I/O port. Includes 2m lead.
-
8X78 I/O Expander Board for the MedeaWiz Sprite DV-S1
£55.00 + VAT Add to basketThe 8X78-IO input / output expander board is equipped with screw terminal strips and is programmed to take up to 8 inputs, control up to 8 triggered files to play and to generate output level changes on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger for the inputs and drive LEDs and relays with the 8 output lines.
-
10″ Android Multi-Touch Commercial Tablet in White with Surround LED Bar and Integrated NFC Reader
£526.00 + VAT Add to basketCommercial Grade Android Panel PC. In white casing.
Surround LED Bar for Room Signage
Integrated NFC Reader
Please call for volume pricing. 15.6, 21.5, 23.6, 27 and 31.5″ screen sizes also available.
Android 10.1″ SoC, 5 point pcap. RK3288, A17 1.6Ghz, 2GB Sdram, 16GB eMMC flash, 500cd/m2, 1280×800, Android 8, USB, LAN, HDMI, WIFI, BT, VESA 75.
-
10″ Android Multi-Touch Commercial Tablet with Surround LED Bar and Integrated NFC Reader
£526.00 + VAT Add to basketCommercial Grade Android Panel PC
Surround LED Bar for Room Signage
Integrated NFC Reader
Please call for volume pricing. 15.6, 21.5, 23.6, 27 and 31.5″ screen sizes also available.
Android 10.1″ SoC, 5 point pcap. RK3288, A17 1.6Ghz, 2GB Sdram, 16GB eMMC flash, 500cd/m2, 1280×800, Android 8, USB, LAN, HDMI, WIFI, BT, VESA 75.
-
10″ Android Multi-Touch Commercial Tablet in WHITE with Surround LED Bar for Room Signage
£497.00 + VAT Add to basketCommercial Grade Android Panel PC in white
Surround LED Bar for Room Signage
Please call for volume pricing. 15.6, 21.5, 23.6, 27 and 31.5″ screen sizes also available.
Android 10.1″ SoC, 5 point pcap. RK3288, A17 1.6Ghz, 2GB Sdram, 16GB eMMC flash, 500cd/m2, 1280×800, Android 8, USB, LAN, HDMI, WIFI, BT, VESA 75.
White Casing
-
10″ Android Multi-Touch Commercial Tablet with Surround LED Bar for Room Signage
£493.00 + VAT Add to basketCommercial Grade Android Panel PC
Surround LED Bar for Room Signage
Please call for volume pricing. 15.6, 21.5, 23.6, 27 and 31.5″ screen sizes also available.
Android 10.1″ SoC, 5 point pcap. RK3288, A17 1.6Ghz, 2GB Sdram, 16GB eMMC flash, 500cd/m2, 1280×800, Android 8, USB, LAN, HDMI, WIFI, BT, VESA 75.
-
10″ Android Multi-Touch Commercial Tablet XPL Model in White with LED side Bar
£436.00 + VAT Add to basketPlease call for volume pricing. 15.6, 21.5, 23.6, 27 and 31.5″ screen sizes also available.
Android 10.1″ SoC, 5 point pcap. RK3288, A17 1.6Ghz, 2GB Sdram, 16GB eMMC flash, 500cd/m2, 1280×800, Android 8, USB, LAN, HDMI, WIFI, BT, VESA 75, pogo connector
-
10″ Android Multi-Touch Commercial Tablet XPL Model with Side LED Bar
£432.00 + VAT Add to basketPlease call for volume pricing. 15.6, 21.5, 23.6, 27 and 31.5″ screen sizes also available.
Android 10.1″ SoC, 5 point pcap. RK3288, A17 1.6Ghz, 2GB Sdram, 16GB eMMC flash, 500cd/m2, 1280×800, Android 8, USB, LAN, HDMI, WIFI, BT, VESA 75, pogo connector
-
7 inch Android Multi-Touch Commercial Tablet with PoE.
£339.00 + VAT Add to basketAndroid 7″ SoC, 5 point pcap, RK3368, Cortex A53, Octa Core, 2GB Sdram, 16GB eMMC flash, 450cd/m2, 1024×600, Android 8, USB, LAN, mini HDMI, WIFI, BT, VESA 75, PoE, Plastic housing, Side LED Bars
-
10” POS Android Advertising Displays
£230.00 + VAT Add to basketThe 10” POS android advertising display has the ability to be in constant use 24/7 for over 70,000 hours and has no external controls to avoid tampering.
-
10 Inch Meeting Room Tablet
£299.00 + VAT Add to basket10 Inch Meeting Room Tablet. This 10 inch tablet has been specifically designed for commercial use. With PoE, an NFC reader and an LED Lightbar…
-
Sale!
7 Inch Advertising Display Landscape
£65.00 + VATaria-hidden="true">£95.00 + VATAdd to basket -
2D Barcode Module for 7 and 10″ Commercial Tablets
£223.00 + VAT Add to basketThis 2D Barcode Module is directly compatible with our 7 and 10″ Commercial Tablets. Attach the Barcode Scanner on your device and the solution can be used as a price-checker and to provide the desired product information. It reads; 1D codes Code 128, EAN-13, EAN-8, Code 39, UPC-A, UPC-E, IBSN, Code 93 and 2D codes PDF417, QR Code (model ½), Data Matrix (ECC200, 000, 050, 080, 100, 140).
-
1D Barcode Module for 7 and 10″ Commercial Tablets
£104.00 + VAT Add to basketThis 1D Barcode Module is directly compatible with our 7 and 10″ Commercial Tablets. Attach the Barcode Scanner on your device and the solution can be used as a price-checker and to provide the desired product information. It reads; Code 128, EAN-13, EAN-8, Code 39, UPC-A, UPC-E, IBSN, Code 93.
-
USB-C to A 3.5mm Serial Adaptor Lead
£14.00 + VAT Add to basketSpecifically for the BrightSign LS423 media player, this USB-C to USB-A and 3.5mm RS232 serial jack adaptor lead allows the connection of external USB and serial control devices. The USB connections are to the latest v3.0 and v3.1 standards and the RS232 serial port supports data rates up to 115,200 baud. Length: 15cm.
-
32GB High Speed Micro SDHC Card
£12.00 + VAT Add to basketA 32GB microSDHC class 10 flash memory card. Recommended memory storage for installing in all BrightSign media players. The 32GB microSDHC card will store many hours of encoded HD or 4K media. Includes a microSD to SD adaptor for use in computers without a microSD reader / writer and with earlier BrightSign players with an SD card reader / writer. Suitable for all BrightSign series 3 and 4 players.
-
Movement Sensor
£80.00 + VAT Add to basketMeasuring just 12 x 12 x 35mm can easily be hidden for a discrete
installation. Allows automatic triggering whenever a person stands in
the beam within 5m. 8 year warranty (subject to T&C’s)! -
MicroSpeaker 2 Rectangular
£68.00 + VAT Add to basketMicroSpeaker range comprises of two differing miniature loudspeaker
models that are both very easy to integrate into a dividing wall or
various cabinets, shelving and offer exceptional
sound quality. 6cm x 10cm. 3 yr warranty. -
BrightSign BP900 11 Button LED Board
£82.50 + VAT Add to basket11 x capacitive touch buttons with LEDs in the centre supplied on a thin board which can be easily overlaid with custom graphics etc. Supplied with 1 metre USB cable. Can be used with any BrightSign unit with a USB port.
1 to 53 of 53 products