MedeaWiz
1 to 10 of 11 products
-
MedeaWiz Sprite DV-S1 HD Digital Media Player
£94.00 + VAT Add to basketHD media player with serial port and push-button input for pro AV applications. Glitch-free looping and playlist playback. No black frames. Tiny size, low power consumption. Uses regular SD memory card or USB memory stick for media storage and playback. HDMI digital video and audio output. Composite video and stereo audio analog outputs.
-
Motion Sensor for the MedeaWiz Sprite DV-S1
£40.00 + VAT Add to basketA PIR motion sensor assembly for the Sprite DV-S1 media player. Plugs directly into and is powered from the Sprite’s I/O port. Includes 2m lead.
-
8GB High Speed SDHC Card
£9.00 + VAT Add to basketCapable of storing up to 90 minutes of HD MPEG-2, over 200 minutes of Standard Definition MPEG-2, and many hours of MP3 digital audio media – dependent on decode bit-rates – when used on BrightSign HD2 and LS2 series media players.
-
16mm Vandal Proof Steel Push Button With 2 Metre Lead
£18.00 + VAT Add to basketA rugged, IP-65 rated, 16mm stainless-steel push-button switch with normally-open contacts and 2m. of cable for use with BrightSign media players with a GPIO port.
-
19mm Vandal-Proof Steel Push-Button & 2 Metre Lead
£20.00 + VAT Add to basketRugged, vandal-proof steel push-button for use in museums, kiosks, etc. Supplied with a 2m cable soldered on as standard but can be any length up to about 10m. Free ends are for connection to the screw terminals of the GPIO port or adapter.
-
8 Input Expander Board for the MedeaWiz Sprite DV-S1
£39.00 + VAT Add to basketAn input expander board for the Sprite DV-S1media player. The input expander board is equipped with a screw terminal strip and programmed to take up to 8 inputs and control up to 8 triggered files on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger.
-
8X78 I/O Expander Board for the MedeaWiz Sprite DV-S1
£55.00 + VAT Add to basketThe 8X78-IO input / output expander board is equipped with screw terminal strips and is programmed to take up to 8 inputs, control up to 8 triggered files to play and to generate output level changes on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger for the inputs and drive LEDs and relays with the 8 output lines.
-
25 Input Expander Board for the MedeaWiz Sprite DV-S1
£64.00 + VAT Add to basketAn input expander board for the Sprite DV-S1media player. Enables up to 25 separate inputs on a 5×5 matrix to the Sprite DV-S1 player. The input expander board is equipped with a screw terminal strip and programmed to take up to 25 inputs and control up to 25 triggered files on the Sprite DV-S1 player. You can use push-buttons, dry contacts such as a relay, or logic-level voltage changes with a high-to-low transition trigger. The 8×78-25IN board is physically the same as the regular 8×78-IN board. Only the processor is programmed differently to accept 25 inputs.
-
OEM MedeaWiz Sprite DV-S1 HD Digital Media Player
Read moreOEM version of the Sprite DV-S1, from MedeaWiz. Minimum Order Quantity of 500 units.
-
32GB High Speed SDHC Card
£18.00 + VAT Add to basketCapable of storing up to 6 hours of HD, over 12 hours of Standard Definition, and hundreds of hours of MP3 digital audio media – dependent on decode bit-rates – when used on BrightSign HD2 and LS2 series media players.
1 to 10 of 11 products